High Frequency 32 AWG 200mm 30 Pin FFC Cable

32AWG Strip FFC Flexible Flat Cable 200mm 30pins Same And Reversed Direction FPC Wires

Product information:

Flexible Flat Cable (FFC) Common models are as follows:

Type A: The two ends are connected and the reinforcing plate is pasted on the insulating adhesive paper;

Type B: The reinforcement board is pasted directly on the insulating adhesive paper;

Type C: The reinforcing plates at both ends are directly pasted on the conductor;

Type D: The reinforcement plates at both ends are directly pasted on the conductor cross;

Type E: one end of the reinforcement board is attached to the insulating adhesive paper, and the other end is directly soldered;

Type F: The reinforcing plates at both ends are directly attached to the insulating adhesive paper, and the internal half is peeled off;

Type G: Solder directly at both ends.

Parameter:

FFC technical parameters:

1. Number of conductors N: the number of copper conductors in the cable;

2. Pitch P: the distance between the centerlines of two adjacent conductors;

3. Margin M: the distance between the center line of the outermost conductor and the edge of the cable:

4. Full pitch TP: the distance between the outermost two conductor centerlines, TP=P*(N-1);

5. Total width W: the distance between the two edges of the cable, W=P*(N+1);

6. Total length TL: the distance between the two ends of the cable;

7. Insert thickness TT: the thickness of the two connecting ends of the cable;

AWG(AMERICAN WIRE GANGE) specification: